Mixed-bed resin for DI-filter

The mixed-bed mixture is intended for use in conjunction with our regeneration service. The mixed-bed mixture is a high-quality resin mixture for direct water purification. It is suitable for use in regenerative or non-regenerative cartridges and in large exchanger systems. Channelling water at the recommended rate through the freshly supplied resin bed can almost completely remove all suspended particles. The remaining particles generate average conductivities of about 0.1 µS/cm during most of the service life of the system, which can be extended depending on the desired water quality to be achieved.

When the mixed-bed resin in your DI filter is exhausted you can easily replace the mixed-bed resin. Fill an empty barrel with the exhausted resin and refill the filter with new mixed-bed resin using the funnel and protective pipe. Send the barrel with the exhausted resin to Cleantecs. Your barrel with "Regenerated mixed-bed resin" will be returned.

Attention! Regeneration service:
Purchasing the "Recyclable mixed-bed resin" gives you the right to use our regeneration service.

 

Recyclable mixed-bed resin (new resin)


Fill an empty barrel with the exhausted resin and refill the filter with new mixed-bed resin using the funnel and protective pipe. Send the barrel with the exhausted resin to Cleantecs

EN - TD - Mehrweg Mischbettharz 50 L
Recyclable mixed-bed resin 50 L
Liter 50
Empty barrel 60 l 2 units
Funnel 1 unit
Protective pipe 1 unit
Item number
99.5800.050
EN - TD - Mehrweg Mischbettharz 100 L
Recyclable mixed-bed resin 100 L
Liter 100
Empty barrel 60 l 4 units
Funnel 1 unit
Protective pipe 1 unit
Item number
99.5800.100
EN - TD - Mehrweg Mischbettharz 200 L
Recyclable mixed-bed resin 200 L
Liter 200
Empty barrel 60 l 6 units
Funnel 1 unit
Protective pipe 1 unit
Item number
99.5800.200
EN - TD - Mehrweg Mischbettharz 400 L
Recyclable mixed-bed resin 400 L
Liter 400
Empty barrel 60 l 10 units
Funnel 1 unit
Protective pipe 1 unit
Item number
99.5800.400
Submit an enquiry

Would you like to get some advice?
Give up a call!

Tel. +49730792650

 

To submit an enquiry, please use our form.

Contact form

 

Regenerated mixed-bed resin


After regeneration, regenerative mixed-bed resin can achieve the same ultrapure water capacity as new resin. A prerequisite for this is a sufficient quantity of regenerants. In general, reasonable capacities and qualities can be economically achieved with relatively low quantities of regenerants. It can be assumed that "Regenerated mixed-bed resin" from Cleantecs has a slightly lower capacity than new resin. Exact values cannot be specified. Cleantecs only accepts mixed-bed resin for regeneration that has been used for obtaining ultrapure water for PV systems. This prevents the resin mixture from being contaminated by applications from other sectors.

Regenerated mixed-bed resin can only be ordered when a "Recyclable mixed-bed resin" has been previously purchased.


EN - TD - Regeneriertes Mischbettharz 50 L
Regenerated mixed-bed resin 50 L
Liter 50
Item number
99.5810.050
EN - TD - Regeneriertes Mischbettharz 100 L
Regenerated mixed-bed resin 100 L
Liter 300
Item number
99.5810.100
EN - TD - Regeneriertes Mischbettharz 200 L
Regenerated mixed-bed resin 200 L
Liter 200
Item number
99.5810.200
EN - TD - Regeneriertes Mischbettharz 400 L
Regenerated mixed-bed resin 400 L
Liter 400
Item number
99.5810.400
Submit an enquiry

Would you like to get some advice?
Give up a call!

Tel. +49730792650

 

To submit an enquiry, please use our form.

Contact form

 

Non-recyclable resin


EN - TD - Einwegharz 50 L
Non-recyclable resin 50 L
Liter 50
Item number
99.5820.050


(Picture may differ from original product.)

EN - TD - Einwegharz 250 L
Non-recyclable resin 250 L
Liter 250
Item number
99.5820.250


(Picture may differ from original product.)

EN - TD - Trichter und Schutzrohr
Funnel and protective pipe
   
Item number 99.5800.001